routing control
英 [ˈraʊtɪŋ kənˈtrəʊl]
美 [ˈraʊtɪŋ kənˈtroʊl]
网络 流程控制; 路由控制; 路由控制机制; 路由业务机制; 选路控制
双语例句
- In the insurance approval widget, the IT user could display the related work item fields for routing control while the current ECM work data widget could display the other work item fields.
在这个保险审批小部件中，IT用户可以显示相关工作项目字段进行路由控制，而当前ECM工作数据小部件可以显示其他工作项目字段。 - This routing control enables great flexibility for the administrator to make changes in the infrastructure without that change showing through to the end user.
此路由控制为管理员更改基础结构提供了巨大的灵活性，使这种更改不会显示给最终用户。 - The Push Service allows the addition of business logic, to provide billing and routing control.
PushService允许添加商务逻辑，提供记录和路由控制。 - There exists two key problems such as routing control and multi-user recognition for the realization of Signaling Connection Control Part ( SCCP) connection-oriented operations, for its most important character is routing selection ahead of data transfer.
信令连接控制部分（SCCP）面向连接业务的最主要特点是在传递数据之前的连接建立阶段就完成了路由选择，因而如何解决路由控制和多用户识别问题是实现该业务的关键。 - Internet routing control by link weights optimization with traffic engineering objectives is studied.
研究通过优化链路权值以控制网络路由来实施流量工程。 - The routing control of the single photon is under the control of the changing of PZT power.
通过改变压电换能器的电压控制马赫曾德尔干涉仪的单个光子在两个输出端的选择，实现了光子在节点上的路由。 - The ROADM with 4-stage parallel connection is designed and analyzed to prove its advantages, whose routing control table at the dropping state is also provided by the matrix analysis.
设计并分析了4级并联的梯状式ROADM，由传输矩阵导出各种波长下载状态的路由控制表。 - Characteristics analysis and routing control for a class of double-loop networks
一类双环网的特征分析及寻径控制 - The results showed that the dispersed routing control algorithm was suitable to the multicasting communication which needs real time and Quality of Service ( QoS).
实验结果证明，分散路由控制算法适用于具有实时性和QoS需求的组播通信。 - A dispersed routing control algorithm was developed on the basis of the shortest path algorithm to solve network transfer quality of multicast routing. The performance of the proposed algorithm was analyzed and evaluated.
为了解决网络中组播路由的传输质量，在最短路径算法的基础上提出了分散路由控制算法，并对其性能进行了分析和评价。 - A Source-Routing Based Multi-Constrained Real-Time Multicast Routing Control Algorithm
一类基于源路由的多约束实时组播路由优化控制算法 - Routing control and fault-tolerance analysis of Benes network
Benes网的寻径控制及容错分析 - Study on Routing Control of Satellite Networks Based on Constellation
基于星座的卫星网络路由控制研究 - Implementation of the Core Router Distributed Routing Control
核心路由器分布式路由控制的实现技术 - This paper addresses the routing control of permutations from the point of view of inherent communica-tion capability of the network So a 0-1 distributing graph ( G_ ( 0-1)) is presented, and a control algorithm is designed. Finally, the permutation capability is analyzed in brevity.
本文从潜在的通讯能力方面讨论该网的置换寻径控制，为此提出0&1分配图（G（0-1））的概念，并设计了一个控制算法，最后对该网的置换能力作了一些分析。 - This paper addresses the routing control for Benes network. An O ( log2N) algorithm is proposed for the realization of all permutations.
本文讨论Benes网的寻径控制问题，从该网的对称结构出发提出了一个适用于全部置换且复杂度为O（log2N）的并行控制算法； - Dynamic Routing Control Based on Energy Balancing in Underwater Acoustic Networks
水声通信网中基于能量平衡的动态路由控制 - In order to solve the problem that power supply of some relay nodes in underwater acoustic networks is exhausted earlier due to overuse, a new dynamic routing control method is presented.
针对水声传感器网中一些中继节点因过分使用而过早耗尽能量的问题，提出一种动态路由控制新方法。 - This routing protocol divides the networks into backbone networks and non-backbone networks, and performs a policy that combines static configuration and dynamic adjustment to achieve the routing control.
协议将空间冗余自组织网络分为骨干网和非骨干网，采用静态配置和动态调整相结合的方式实现路由控制。 - Therefore, there exist frequent link breakages, which lead to frequent path failures and route reconstructions, so as to increase the overhead of routing control traffic.
因此，网络中存在频繁的链路断开，这将带来频繁的路径失效和路由重建，以至于增加路由控制开销。 - Besides, we select the sensors as used. ( 3) For grid corridors environment, the paper main study routing control algorithms which are suitable for ribbon sensor network, and proposes a data fusion routing control algorithm.
针对电网走廊环境，主要研究了适宜于带状传感器网络的路由控制算法，并提出了一种数据融合的路由控制算法。 - Meanwhile, before the service is established, It modifies the SIP signaling based on user information, and make the routing control system interaction complete.
同时，在业务建立前根据用户信息修改SIP信令，并完成与路由控制系统的交互。 - This dissertation focuses on the header periodic replication, header recognition and payload optical buffer, and these conclusions achieved have important reference value for implementation of all-optical routing control and development of all-optical packet switching.
本文针对全光路由控制的帧头复制、识别，以及光缓存技术进行了深入研究和探讨，取得的成果对于全光路由控制的实现和全光分组交换的发展有重要的参考价值。 - The self-similar data flow makes Ad Hoc networks congested. And the congestion leads to the overflow of MAC layer interface queue, the aggravation of collisions in MAC layer, and even the disconnection of paths due to the lost of routing control packets.
自相似数据流使adhoc网络出现拥塞现象，导致节点MAC层接口队列溢出，加剧MAC层的碰撞，甚至会出现因路由控制分组丢失而引起的路径断开现象。 - The factor a is used to balance the effect of the average interface queue length in MAC layer of the intermediate nodes of the path and the round-trip time of the routing control packets on the computation of priorities.
AOMDV-LB路由协议引入因子α来平衡路径中间节点MAC层接口队列平均分组个数和路由控制分组往返时间对路径优先级计算的影响。 - It also discusses the component of MPLS-based Routing-Control Technology and principles to achieve the function, and gives an improved model for routing control.
此外，引入流量工程约束路由技术，讨论了基于MPLS的约束路由技术组成及实现原理，并给出了改进的约束路由模型表达。 - In the improved protocol, the node sends repair packets to the pre-nodes, making it switch to their backup routes to continue transmitting data, so it can reduce the overhead by avoiding flooding routing control packets.
该协议通过向上游节点发送修复包，使其切换到备份路由绕开局部中断的链路来继续传输数据，避免了泛洪路由控制包，从而降低路由开销。 - Through the overall software design, to analyze the work theory of switch and adopt the bottom-up design method, the whole system is divided into four function modules: Data Receiving Control Module, Data Transmission Control Module, Routing Control Module and Switching Control Module.
通过总体软件设计，分析交换机的工作原理，采用自底向上的设计方法，将系统划分为四大功能模块：即数据接收控制模块、数据发送控制模块、路由控制模块以及交换控制模块。 - Broadcast is to disseminate the data of nodes to the entire networks, and is widely used for transmitting routing control messages, important codes and latest security patches, and so on. This operation is an important factor for determining the performance of the networks.
广播操作负责将节点的数据分发到整个网络中，经常用于传输路由控制信息、重要程序代码以及最新安全补丁等，是决定网络性能的重要因素。